🎉 Up to 70% Off Selected ItemsShop Sale
80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80
HomeStore

80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80

80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80

Working Width 80 in Number of Flanges 8
Overall Dimensions (L×W×H) 86.9 x 40.7 x 40.5 in Number of Blades 48
Max Working Depth 8 in Blade Arrangement 6 Blades per Flange
Offset Capability N/A Blade Type Heat-Treated 60Si2Mn Steel “C”-Shaped
Skid Shoes Adjustable Depth Control PTO Shaft Included Yes
Rotor Bearing NSK Bearing PTO Shaft Series 8 PTO Shaft with Slip Clutch, 1-3/8" × 6-Spline (Both Ends), Length: 31.5-35 in
Rotor Rotation Forward Tractor PTO Speed 540 RPM
Rotor Speed @ 540 PTO RPM 203 RPM Recommended PTO HP 40-80 HP
Rotor Diameter 3.5 in 3 Point Hitch Cat.2
Rotor Swing Diameter 21.6 in Quick Hitch Compatibility Cat.2 Quick Hitch Compatible
Side Drive Type Gear Driven Rear Deflector Four Spring
Side Box Lubrication SAE 80W-90, Approx. 2.5 L (2.64 qt)
NOTE: SHIPPED WITHOUT OIL.		 Parking Stand Included Yes
Main Gearbox Cast Iron Oil-Bath Gearbox, Gear Ratio 1.71:1 Packing Size (L×W×H) 91.34 x 44.09 x 34.65 in
Gearbox Lubrication SAE 80W-90, Approx. 1.5L (1.59 qt)
NOTE: SHIPPED WITHOUT OIL.		 Weight (N.W/G.W.) 1170.64/1374.20 lbs

WARNlNG: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped),lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s)  for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.

$1,504.65

Original: $4,299.00

-65%
80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80—

$4,299.00

$1,504.65

More Images

80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80 - Image 2
80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80 - Image 3
80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80 - Image 4
80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80 - Image 5
80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80 - Image 6
80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80 - Image 7
80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80 - Image 8
80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80 - Image 9
80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80 - Image 10
80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80 - Image 11
80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80 - Image 12
80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80 - Image 13
80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80 - Image 14
80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80 - Image 15
80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80 - Image 16
80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80 - Image 17
80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80 - Image 18
80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80 - Image 19
80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80 - Image 20
80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80 - Image 21
80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80 - Image 22
80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80 - Image 23
80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80 - Image 24
80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80 - Image 25
80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80 - Image 26

80 in Heavy Duty Rotary Tiller, 3 Point Hitch Cat.2, Gear Drive, PTO Shaft Included with Slip Clutch, 40-80 HP, HRT80

Working Width 80 in Number of Flanges 8
Overall Dimensions (L×W×H) 86.9 x 40.7 x 40.5 in Number of Blades 48
Max Working Depth 8 in Blade Arrangement 6 Blades per Flange
Offset Capability N/A Blade Type Heat-Treated 60Si2Mn Steel “C”-Shaped
Skid Shoes Adjustable Depth Control PTO Shaft Included Yes
Rotor Bearing NSK Bearing PTO Shaft Series 8 PTO Shaft with Slip Clutch, 1-3/8" × 6-Spline (Both Ends), Length: 31.5-35 in
Rotor Rotation Forward Tractor PTO Speed 540 RPM
Rotor Speed @ 540 PTO RPM 203 RPM Recommended PTO HP 40-80 HP
Rotor Diameter 3.5 in 3 Point Hitch Cat.2
Rotor Swing Diameter 21.6 in Quick Hitch Compatibility Cat.2 Quick Hitch Compatible
Side Drive Type Gear Driven Rear Deflector Four Spring
Side Box Lubrication SAE 80W-90, Approx. 2.5 L (2.64 qt)
NOTE: SHIPPED WITHOUT OIL.		 Parking Stand Included Yes
Main Gearbox Cast Iron Oil-Bath Gearbox, Gear Ratio 1.71:1 Packing Size (L×W×H) 91.34 x 44.09 x 34.65 in
Gearbox Lubrication SAE 80W-90, Approx. 1.5L (1.59 qt)
NOTE: SHIPPED WITHOUT OIL.		 Weight (N.W/G.W.) 1170.64/1374.20 lbs

WARNlNG: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped),lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s)  for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.

Product Information

Shipping & Returns

Description

Working Width 80 in Number of Flanges 8
Overall Dimensions (L×W×H) 86.9 x 40.7 x 40.5 in Number of Blades 48
Max Working Depth 8 in Blade Arrangement 6 Blades per Flange
Offset Capability N/A Blade Type Heat-Treated 60Si2Mn Steel “C”-Shaped
Skid Shoes Adjustable Depth Control PTO Shaft Included Yes
Rotor Bearing NSK Bearing PTO Shaft Series 8 PTO Shaft with Slip Clutch, 1-3/8" × 6-Spline (Both Ends), Length: 31.5-35 in
Rotor Rotation Forward Tractor PTO Speed 540 RPM
Rotor Speed @ 540 PTO RPM 203 RPM Recommended PTO HP 40-80 HP
Rotor Diameter 3.5 in 3 Point Hitch Cat.2
Rotor Swing Diameter 21.6 in Quick Hitch Compatibility Cat.2 Quick Hitch Compatible
Side Drive Type Gear Driven Rear Deflector Four Spring
Side Box Lubrication SAE 80W-90, Approx. 2.5 L (2.64 qt)
NOTE: SHIPPED WITHOUT OIL.		 Parking Stand Included Yes
Main Gearbox Cast Iron Oil-Bath Gearbox, Gear Ratio 1.71:1 Packing Size (L×W×H) 91.34 x 44.09 x 34.65 in
Gearbox Lubrication SAE 80W-90, Approx. 1.5L (1.59 qt)
NOTE: SHIPPED WITHOUT OIL.		 Weight (N.W/G.W.) 1170.64/1374.20 lbs

WARNlNG: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped),lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s)  for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.