3-Point PTO Stump Grinder & 8 inch ZONSEN E-Start 1000cc 35hp Gas Powered Wood Chipper Combo, SG24 & B200

 3-Point PTO Stump Grinder 

Flywheel Diameter	24 in	Mounting	3 Point Hitch Cat. 1 (Quick Attach Compatible)
Flywheel Thickness	3/4 in	PTO Input	540 RPM
Carbid Tip	34 PCS	Max. Torque	1200 N·m
Carbid Tip Material	YG11C	PTO Shaft Weight	44 LBS
Tip Holder Material	42CrMo	Dimensions	29 × 37 × 38 in
PTO HP Required	15–45 HP	Packing	Iron Frame + Carton
PTO Shaft (Included Shipping)	1-3/8” 6 Spline Tractor and Implement Ends PTO Driveline Shaft with Slip Clutch	Weight (N.W/G.W.)	450/563 LBS
Friction Torque Limiter (Slip Clutch)	Included

 

 8 inch 35hp Wood Chipper

Engine	ZONSEN GB1000	Feed Roller	13.8 in
Engine Type	Air cooled 4-stroke OHV petrol engine	Knives Nos.	2 x Blade; 1 x Anvil
Displacement/HP	1000cc；35hp	Knives Material	A8 （5Cr8MoVSi）
Rated Power	23.5 kw/3600 rpm	Discharge Chute	360 Degree Rotating
Max. Net Torque	71.2 Nm/2500 rpm	Emergency Stop	Stop Bar + Button
Fuel Capacity	4.76 gal	Towing	Tow Bar with 2 in Coupler
Starting	Electric Starting	Wheel	19*7.00-8 Tubeless
Battery	45Ah 12V Lead-Acid Battery	Wheel Base	48 in
Belt	4 x V-Belts	Package Method	Plywood Case
Belts Material	Kevlar	Weight (N.W./G.W.)	705/798 lbs
Clutch	Centrifugal Clutch	Packing Size (L*W*H)	50 x 30 x 49 in
Cutting Method	Drum	Machine Warranty	2 Years
Max. Chipping Dia.	8 in	Engine Warranty	2 Years

 

 

WARNlNG: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped),lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s)  for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.